Funkwerk WI2040n Instrukcja Użytkownika Pobierz pdf (Strona 144)

Chapter 11 LAN

In this menu, you configure the addresses in your LAN and can structure your local network

using VLANs.

11.1 IP Configuration

In this menu, you can edit the IP configuration of the LAN and Ethernet interfaces of your

device.

11.1.1 Interfaces

In the LAN -> IP Configuration -> Interfaces menu, the available IP interfaces are listed.

You can edit the IP configuration of the interfaces or create virtual interfaces for special ap-

plications. Here is a list of all of the interfaces (logical Ethernet interfaces and others cre-

ated in the subsystems) configured in the System Management-> Interface Mode /

Bridge Groups -> Interfaces menu.

Use the to edit the settings of an existing interface (bridge groups, Ethernet interfaces in

routing mode).

You can use the New button to create virtual interfaces. However, this is only needed in

special applications (e.g. BRRP).

Depending on the option selected, different fields and options are available. All the config-

uration options are listed below.

The default setting for all existing interfaces of your device is Bridging mode. In the ex

works state the bridge group br0 is pre-configured as a DHCP client with the fallback IP ad-

dress  and netmask .

Note

Please note:

If your device has obtained an IP address dynamically from a DHCP server operated

in your network for the basic configuration, the fallback IP address 192.168.0.252 is

deleted automatically and your device will no longer function over this address.

However, if you have set up a connection to the device over the fallback IP address

192.168.0.252 or have assigned an IP address with the Dime Manager in the basic

11 LAN Funkwerk Enterprise Communications GmbH

132 bintec WLAN and Industrial WLAN

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 431 432

Brak uwag

Funkwerk WI2040n Instrukcja Użytkownika Strona 144